.Rows marked with a * asterisk should be set in the MatlabDispatch function.
|
simulation_state.generators(i).power_available |
double |
kW, max generator power output |
* |
simulation_state.generators(i).power_setpoint |
double |
kW, commanded power output |
|
simulation_state.generators(i).current_state |
string |
See description below |
|
simulation_state.wind_turbines(i).power_available |
double |
kW, max wind turbines power output |
* |
simulation_state.wind_turbines(i).power_setpoint |
double |
kW, commanded power output |
|
simulation_state.wind_turbines(i).current_state |
string |
See description below |
The value of current_state are set to one of the following by HOMER: DISPATCH_DECIDES, FORCED_OFF_FOR_MAINTENANCE_EVENT, FORCED_OFF_FOR_SCHEDULE, FORCED_OFF_OUT_OF_FUEL, FORCED_ON_FOR_MINIMUM_RUNTIME, FORCED_ON_FOR_SCHEDULE
|
simulation_state.pvs(i).power_available |
double |
kW, pv generation available |
* |
simulation_state.pvs(i).power_setpoint |
double |
kW, optional curtailing |
* |
simulation_state.converters(i).inverter_power_input |
double |
kW |
* |
simulation_state.converters(i).inverter_power_output |
double |
kW |
* |
simulation_state.converters(i).rectifier_power_input |
double |
kW |
* |
simulation_state.converters(i).rectifier_power_output |
double |
kW |
* |
simulation_state.batteries(i).dedicated_converter.inverter_power_input |
double |
kW |
* |
simulation_state.batteries(i).dedicated_converter.inverter_power_output |
double |
kW |
* |
simulation_state.batteries(i).dedicated_converter.recifier_power_input |
double |
kW |
* |
simulation_state.batteries(i).dedicated_converter.rectifier_power_output |
double |
kW |
|
simulation_state.batteries(i).energy_cost |
double |
cost/kWh, i.e. $/kWh |
|
simulation_state.batteries(i).max_charge_power |
double |
kW |
|
simulation_state.batteries(i).max_discharge_power |
double |
kW |
* |
simulation_state.batteries(i).power_setpoint |
double |
DC kW, positive is charging |
|
simulation_state.batteries(i).state_of_charge_kwh |
double |
kWh |
|
simulation_state.batteries(i).state_of_charge_percent |
double |
% |
|
simulation_state.primary_loads(i).load_requested |
double |
kW |
* |
simulation_state.primary_loads(i).load_served |
double |
kW, MATLAB controller should set this equal to load_requested unless there is unmet load |
* |
simulation_state.ac_bus.capacity_shortage |
double |
kW, operating_capacity_requested - operating_capacity_served, >=0 |
* |
simulation_state.ac_bus.excess_electricity |
double |
load_served - load_requested, >=0 |
|
simulation_state.ac_bus.load_requested |
double |
kW |
* |
simulation_state.ac_bus.load_served |
double |
kW, sum of all AC generation plus inverter output power, minus rectifier input power, <= load_requested |
|
simulation_state.ac_bus.operating_capacity_requested |
double |
kW |
* |
simulation_state.ac_bus.operating_capacity_served |
double |
sum of maximum capacity of all operating generators, batteries, plus renewable output |
* |
simulation_state.ac_bus.unmet_load |
double |
load_requested - load_served, >=0 |
* |
simulation_state.dc_bus.capacity_shortage |
double |
kW, operating_capacity_requested - operating_capacity_served, >=0 |
* |
simulation_state.dc_bus.excess_electricity |
double |
load_served - load_requested, >=0 |
|
simulation_state.dc_bus.load_requested |
double |
kW |
* |
simulation_state.dc_bus.load_served |
double |
kW, sum of all DC generation plus rectifier output power, minus inverter input power, <= load_requested |
|
simulation_state.dc_bus.operating_capacity_requested |
double |
kW |
* |
simulation_state.dc_bus.operating_capacity_served |
double |
sum of maximum capacity of all operating generators, batteries, plus renewable output |
* |
simulation_state.dc_bus.unmet_load |
double |
load_requested - load_served, >=0 |
|
simulation_state.current_timestep |
int |
Increments in each time step of the simulation, i.e. with a one-hour time step, the value will increment from zero to 8759 over the course of the simulation |
* |
simulation_state.grids(i).grid_purchases |
double |
Set to the energy purchased from the grid this time step, kW |
* |
simulation_state.grids(i).grid_sales |
double |
Set to the energy sold to the grid, kW |
|
simulation_state.grids(i).grid_state |
GridState (see simulation_parameters) |
Defines the current state of the grid, as dictated by the model |
|
simulation_state.grids(i).max_grid_purchases |
double |
Maximum power in kW that the grid can supply. grid_purchases can't exceed this value. This is also the operating reserve supplied by the grid. |
|
simulation_state.grids(i).max_grid_sales |
double |
Maximum power in kW that can be sold to the grid. Maximum value for grid_sales |
|
simulation_state.grids(i).power_price |
double |
Price paid for grid purchases, cost/kWh |
|
simulation_state.grids(i).sellback_rate |
double |
Revenue for grid sales, income/kWh |
See also